Sony STR-DH800 - Manual (Page 13)

13 US
Name Function
A AV ?/1
(on/standby)
Press to turn on or off the
audio/video components that
the remote is programmed to
operate.
To turn the TV on or off, press
TV (C) and then press AV
?/1.
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other components
(SYSTEM STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (5).
B ?/1
(on/standby)
Press to turn the receiver on or
set it to standby mode.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
Saving the power in
standby mode
When “CTRL:HDMI” is set to
“CTRL OFF” (page 49) and
“S-AIR STBY” is set to
“STBY OFF” (page 49).
C TV
Press to light up the button. It
changes the remote key
function to activate the buttons
with yellow printing. It also
activate the
(J), V/v/B/b
(J), TOOLS/OPTIONS
(K), MENU/HOME (L),
RETURN/EXIT O (w;), and
DISPLAY (wa) buttons to
perform menu operations for
Sony TVs only.
D AMP
Press to light up the button to
activate the receiver operation
(page 36).
E Input buttons Press one of the buttons to
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control
Sony components.
You can program the remote to
control non-Sony components
following the steps in
“Programming the remote” on
page 104.
Name Function
Numeric
buttons
(number 5
a)
)
Press SHIFT (wg) and then
press numeric buttons to
– preset/tune to preset stations.
– select track numbers of the
CD player, VCD player, LD
player, DVD player, MD
deck, DAT deck, or tape
deck. Press 0/10 to select
track number 10.
– select channel numbers of
the VCR, satellite tuner, Blu-
ray disc player, PSX, DVD/
VHS COMBO, or DVD/
HDD COMBO.
Press TV (3) and then press
the numeric buttons to select
the TV channels.
-/-- Press SHIFT (wg) and then
press -/-- to select the channel
entry mode, either one or two
digit of the VCR or satellite
tuner.
To select the channel entry
mode of the TV, press TV (C)
and then press -/--.
ENT/MEM Press SHIFT (wg) and then
press ENT/MEM to enter the
value after selecting a channel,
disc or track using the numeric
buttons of the VCR, CD
player, VCD player, LD
player, MD deck, DAT deck,
tape deck, satellite tuner, Blu-
ray disc player, or PSX.
To enter the value of Sony TV,
press TV (C) and then press
ENT/MEM.
Press SHIFT (wg) and then
press ENT/MEM to store a
station during tuner operation.
CLEAR/>10 Press SHIFT (wg) and then
press CLEAR/>10 to clear a
mistake when you press the
incorrect numeric button of the
DVD player, Blu-ray disc
player, PSX, satellite tuner,
DVD/VHS COMBO, or DVD/
HDD COMBO.
Press SHIFT (wg) and then
press CLEAR/>10 to select
track numbers over 10 of the
CD player, VCD player, LD
player, MD deck, tape deck,
TV, VCR, or satellite tuner.
continued