Sony STR-DH800 - Manual (Page 55)

55 US
A
m
p
lif
ie
r O
p
e
ra
tio
n
s
Adjusting the equalizer
(EQ menu)
You can use the EQ menu to adjust the tonal
quality (bass/treble level) of the front
speakers.
Select “EQ” in the amplifier menus. For
details on adjusting the parameters, see
“Navigating through menus” (page 45) and
“Overview of the menus” (page 46).
EQ menu parameters
x BASS (Front speakers bass
level)*
x TREBLE (Front speakers treble
level)*
* You can also adjust the front speaker bass and
treble level with TONE MODE and TONE +/– on
the receiver (page 7).
Note
This function does not work in the following cases.
– Dolby TrueHD signals with a sampling frequency
of more than 96 kHz are being received.
– PCM signals with a sampling frequency of more
than 96 kHz are being received.
Settings for the tuner
(TUNER menu)
You can use the TUNER menu to set the FM
station receiving mode, name preset stations
and check SIRIUS Satellite Radio status.
Select “TUNER” in the amplifier menus. For
details on adjusting the parameters, see
“Navigating through menus” (page 45) and
“Overview of the menus” (page 46).
TUNER menu parameters
x FM MODE (FM station receiving
mode)
• STEREO
This receiver will decode the signal as stereo
signal when the radio station is broadcast in
stereo.
• MONO
This receiver will decode the signal as mono
signal regardless of the broadcast signal.
x NAME IN (Naming preset
stations)
Lets you set the name of preset stations. For
details, see “Naming preset stations” (page
71).
x PARENTAL (Parental lock)
Lets you restrict access to certain channels
using your own lock code. For details, see
“Restricting access to specific channels
(Parental Lock)” (page 77).
x CODE EDIT (Lock code edit)
Lets you change the lock code. For details, see
“To change the lock code” (page 78).
continued