Sony STR-DH800 - Manual (Page 78)

78 US
4
Press V/v repeatedly to select
“TUNER”.
5
Press or b to enter the
menu.
6
Press V/v repeatedly to select
“PARENTAL”.
7
Press or b to enter the
parameter.
8
Press V/v repeatedly to select
“LOCK ON” then press .
“CODE x” appears on the display.
9
Press SHIFT.
10
Enter your 4-digit lock code
using the numeric buttons.
“LOCKED” appears on the display and
the Parental Lock is set.
To delete the numbers you have entered,
repeat the procedure above from step 3.
Select “LOCK OFF” in step 8.
To change the lock code
1
Press TUNER repeatedly to select
“SIRIUS”.
You can also use INPUT SELECTOR on
the receiver.
2
Press AMP MENU.
3 Press V/v repeatedly to select
“TUNER”.
4
Press or b to enter the menu.
5 Press V/v repeatedly to select “CODE
EDIT”.
6 Press or b to enter the parameter.
“CODE x” appears on the display.
7 Press SHIFT.
8 Enter your 4-digit lock code using the
numeric buttons.
“NEW x” appears on the display.
9 Enter a new 4-digit lock code using the
numeric buttons.
“CONF. x” appears on the display.
10
Reenter the new lock code with the
numeric buttons.
“CHANGED” appears on the display.
To listen to the locked channels
1
Press TUNER repeatedly to select
“SIRIUS”.
You can also use INPUT SELECTOR on
the receiver.
2
Select a locked channel you want to
listen to using Direct Tuning (page 75).
“LOCKED CH” appears on the display.
3 Press SHIFT.
4
Enter your 4-digit lock code using the
numeric buttons.
The channel is tuned in.
To cancel the Parental Lock
1 Press TUNER repeatedly to select
“SIRIUS”.
You can also use INPUT SELECTOR on
the receiver.
2
Select a channel you want to unlock
using Direct Tuning (page 75).
“LOCKED CH” appears on the display.
3 Press SHIFT.
4 Enter your 4-digit lock code using the
numeric buttons.
The channel is tuned in.
5 Press AMP MENU.
6 Press V/v repeatedly to select
“TUNER”.
7 Press or b to enter the menu.
8 Press V/v repeatedly to select
“PARENTAL”.
9 Press or b to enter the parameter.