Sony PCGA-UVC11A - Manual (Page 17)

17 GB
Continued on next page
Fastening using an adhesive sheet
The camera can be fastened to any flat surface, such as the top of an LCD
monitor, using the supplied adhesive sheet (small).
1
Peel off the cover of the two sided tape and apply the
adhesive sheet (small) to the bottom side of the camera.
Note
When applying the adhesive sheet, make sure that the camera is free of dust and dirt.
2
Peel off the protective cover on the top of the adhesive sheet
and apply the camera to the location to mount the camera.
3
Connect the camera USB cable to the computer’s USB
connector.
Refer to the manuals provided with your computer to locate the
position of the USB connector on your computer.