Sony PCGA-UVC11A - Manual (Page 18)

18 GB
Setting horizontally
Use the mounting adapter as shown below to set the camera horizontally on
a flat and steady surface, such as the CRT display or the top of your
computer.
1
Attach the camera to the mounting adapter.
Holding the arm plate, pull out the rear arm as shown in the illustration
below, and attach the camera to the mounting adapter. Make sure that
you place the mounting adapter on a level, stable surface.
2
Connect the camera USB cable to the computer’s USB
connector.
Refer to the manuals provided with your computer to locate the
position of the USB connector on your computer.
Arm Arm plate
Mounting adapter