Sony RCD-W3 - Manual (Page 10)

10
Locating a Specific Track
You can quickly locate any track while playing
a disc by using the AMS . and >
(Automatic Music Sensor) on the deck, .
and > buttons on the remote, or number
buttons on the remote.
Before using the remote, set SELECT to CD for
operations on DECK A, or to CDR for
operations on DECK B.
AMS . / >
To locate
Stop playback
The next or
succeeding
tracks
The beginning
of the current or
preceding tracks
A specific track
directly
* AMS: Automatic Music Sensor
Tips
To pause playing at the beginning of a track, press
AMS . or > (or press . or > on the
remote) after pausing playback.
Do the following:
Press x.
During playback, press AMS* >
until you find the track.
During playback, press AMS .
until you find the track.
Press the number button(s) on the
remote to enter the track number.
Playing directly using the
number buttons
You can playback a track directly by using the
number buttons. Press the track number you
want to play. The track will be played shortly
after you press the number buttons. If the
number is 2 digits, press the second digit
immediately after you press the first digit.
Example:
When you press 1 (or 2 ,etc.), “1--” appears on
the front panel display.
If you don’t press the second digit immediately,
track 1 will be played shortly after “1--”
appears on the front panel display.