Sony RCD-W3 - Manual (Page 22)

22
Explanation
• A record-related button has been
pressed when a finalized disc is in
the DECK B.
• A record-related button has been
pressed when a standard CD is in
the DECK B.
A non-audio CD-ROM or a CD-
Video disc has been placed in the
machine.
• An unfinalized disc has been
placed in the DECK A.
• There is a problem with the disc.
• A DVD disc has been placed in
the unit.
There is not enough time left on the
disc to complete a planned
recording.
There is a problem with the tray.
A dubbing has not been completed
properly.
More than 20 tracks have been
programmed.
A record-related button has been
pressed when a non-audio disc is in
the DECK B.
System Limitations
“TOC” appears for a long time
If the inserted recordable CD-R/RW is brand new,
“TOC” appears in the front panel display longer than
for CD-R/RWs that have been used.
Limitations when recording over an
existing track
• The correct remaining recording time may not be
displayed.
• You may find it impossible to record over a track if
that track has been recorded over several times
already.
• The remaining recording time may be shortened
out of proportion to the total recorded time.
• Recording over a track to eliminate noise is not
recommended since this may shorten the duration
of the track.
• You may find it impossible to label a track after
recording over a previous one.
• You can record songs for up to 99 tracks.
Additional Information
Message
CHECK DISC
DATA DISC
DISC ERROR
DISC FULL
ERROR
FAILED
FULL
NO AUDIO
Error Messages
The following table explains the error messages
that appear in the display.