Sony DHC-MD595 - Manual (Page 10)

10
Recording a CD on an
MD
— CD-MD Synchro Recording
You can make a digital recording of a CD on an
MD, marking track numbers in the same sequence
as the original CD.
In addition to normal-speed recording, you can
also record at high speed (approximately four
times the normal speed).
You can also select the recording method to suit
your purpose (see page 24).
To turn on the system, press ?/1 (power).
?/1 (power)
2
Press CD Z and place a CD on the disc
tray.
With the label side
up. When you play a
single CD, place it
on the inner circle of
the tray.
3
Press CD Z to close the disc tray.
4
Press CD-MD SYNC NORMAL.
To record at high speed, press CD-MD
SYNC HIGH.
“NORMAL SPEED” (“HIGH SPEED” for
high-speed recording) appears. The MD deck
stands by for recording and the CD player
pauses for play.
5
Press MD HS.
Recording starts. You cannot monitor the
recorded signal during high-speed
recording. When the recording is completed,
the CD player and the MD deck stop
automatically.
To stop recording
Press MD x.
If the MD becomes full during recording, the MD
deck and the CD player automatically stop.
With the arrow
pointing toward
the deck
With the label
side up, and the
shutter on the
righthand side
5
2,3 4
MD Z MD x
CD x
1
Insert a recordable MD.