Sony DHC-MD595 - Manual (Page 39)

The MD Deck
—
Editing
39
5
Repeat steps 3 and 4 to enter the rest of
the name.
To change a character
Press TCURSOR or CURSORt
repeatedly until the character to be changed
flashes, press CLEAR to erase the character,
then repeat steps 3 and 4.
6
Press ENTER/YES to complete the
labeling procedure.
The titles you labeled appear sequentially,
and then the original display appears.
To cancel labeling
Press MENU/NO.
Notes
• You can label a track title during play. The
playback repeats until you finish labeling.
• If the MD is record protected, “C11” and
“Protected” appear alternately and the MD cannot
be recorded. Remove the MD, then slide the record
protection tab to the closed position (see page 24).
Copying a disc or track title
You can copy a labeled disc or track title to use it
as a title of another track or the disc title within a
disc.
1 Press MENU/NO in stop mode.
2 Press – or + repeatedly until “Name?” appears,
then press ENTER/YES.
3 Press – or + repeatedly until “Nm Copy?”
appears, then press ENTER/YES.
4 Press – or + repeatedly to select “Disc” (when
copying the disc title) or the track number with
the title you want to copy, then press ENTER/
YES.
5 Press – or + repeatedly to select the copy
destination track number or “Disc” (when
copying as the disc title), then press ENTER/
YES.
When “Overwrite??” appears
The copy destination already has a disc or track
title. To continue and copy the title, press ENTER/
YES.
To cancel copying
Press MENU/NO.
continued