Step 3: presetting radio stations – Sony DHC-MD595 User Manual

Page 7

Advertising
background image

7

Getting Started

Step 3: Presetting radio
stations

You can preset the following number of stations,
20 for FM and 10 for AM.

1

3

2

5,7

5,6

5,6

4

continued

Showing the time

In consideration of reducing standby power, this
system can select whether or not to display the
clock in standby mode. The system is set at the
factory to not display the clock when the power is
off (

Power Saving Mode

). To display the clock

even when the power is off, press DISPLAY or
TIME while the power is off. Press the button
again to turn the clock display off and activate the
Power Saving Mode.

While the system is on, the information that
appears at the top of the display changes as
follows each time you press DISPLAY.

t Preset Equalizer name t Clock

Name* T

Volume T

* Displayed only when disc title, track title, radio

station name or other name information is labeled.
No display when this information is not labeled.

Tip

The upper dot of the clock display flashes for the first
half of a minute (0 to 29 seconds), and the lower dot
flashes for the last half of a minute (30 to
59 seconds).

To change the preset time

You can change the preset time while the system
is off.

1 Press CLOCK/TIMER SET.
2 Repeat steps 3 to 5 of “Setting the time”.

Advertising