Sony STR-DA5500ES - Manual (Page 115)

115 GB
Us
ing O
th
e
r
Fe
atures
Notes
• When “Control for HDMI” is set to “ON,” the
“Audio Out” settings in the HDMI settings menu
will set automatically depending on the System
Audio Control settings.
• When you connect a TV that does not have System
Audio Control function, the System Audio Control
function does not work.
• If the TV is turned on before turning on the
receiver, the TV sound will not be output for a
moment.
When you turn the TV off by using the power
button on the TV’s remote, the receiver and
the connected components turn off
automatically.
You can also use the multifunction remote to
turn off the TV.
Press TV, then press AV ?/1.
The TV, receiver and connected components
are turned off.
Notes
• Set the TV power supply interlock function to on
before using the System Power Off function. For
details, refer to the operating instructions of the
TV.
• Depending on the status, the connected
components may not be turned off. For details,
refer to the operating instructions of the connected
components.
Press the THEATER button on the
remote of the receiver, TV, or the
Blu-ray Disc Player, while pointing
the remote toward the TV.
The sound field switches to HD-D.C.S.
To return to the previous sound field, press the
THEATER button again.
Note
The sound field may not switch depending on the
TV.
Tip
The sound field may be changed back to the
previous one when you change the TV’s input.
This function switches the sound field to HD-
D.C.S. automatically when 24p (24 frames per
second) signals are input from a playback
component, such as a Blu-ray Disc Player.
Play back content containing 24p
signals on a playback component.
The sound field switches to HD-D.C.S.
If you do not want the sound field to switch to
HD-D.C.S. automatically, set “24p Auto
Sound Sync” to “OFF” (page 143).
Notes
• This function does not work if a player is not
compatible with 24p Auto Sound Sync.
• When “Control for HDMI” is set to “ON,”
depending on the player, the sound field may not
switch to HD-D.C.S.
When “Control for HDMI” is set to “ON,” the
receiver detects the 24p signals via “BRAVIA”
Sync. Therefore, if a player that is not compatible
with “BRAVIA” Sync sends out 24p signals, the
receiver will not switch the sound field to HD-
D.C.S. In this case, set “Control for HDMI” to
“OFF.” When “Control for HDMI” is set to “OFF,”
the receiver detects the 24p signals by itself.
Turning off the receiver with the
TV (System Power-Off)
TV
AV ?/1
Enjoying movies with the
optimum sound field (Theater
Mode Sync)
24p Auto Sound Sync