Sony STR-DA5500ES - Manual (Page 191)

191 GB
A
d
ditio
n
al Inf
o
rm
ati
o
n
• Register this device with the server. For
details, refer to the instructions supplied
with the server.
• Wait for a few moments, and then try
connecting to the server again.
If the trouble is other than the cases above and
the trouble is not solved even if you wait for a
while, press ?/1 on the remote or POWER on
the receiver to turn the receiver on again.
If there is a malfunction, the display shows a
code of two numbers and a message. You can
check the status of the system by the message.
See the following table to solve the problem. If
any problem persists, consult your nearest
Sony dealer.
PROTECTOR
Irregular current is output to the speakers, or
the upper panel of the receiver is covered
with something. The receiver will
automatically turn off after a few seconds.
Check the connection of speakers and turn
on the power again.
For other messages, see “Message list after
auto calibration measurement” (page 55),
“SIRIUS Satellite Radio message list”
(page 80), “XM Radio message list” (page 81)
and “DIGITAL MEDIA PORT message list”
(page 66).
Reference sections
To clear the memory of the
simple remote commander
After removing the batteries, do not use the
remote for a few minutes.
Refer to the following web site for details of
the latest information on the receiver.
For customers in the United States and
Canada:
http://www.sony.com/essupport
For the customers in Europe:
http://support.sony-europe.com/quickjump/
STR Error messages
Clearing the memory
To clear See
All memorized settings page 47
Multifunction remote
commander page 179
About support information