Panasonic DMWFL580LPP - Manual (Page 16)

VQT5F44
16
Custom Settings
Customize settings for improved ease of use.
1 Press and hold the [OK] button for more than 2 seceonds.
The flash will enter custom settings mode.
2 Press 3/4 to highlight items.
3 Rotate the dial to change the highlighted item.
4 Press the [OK] button.
Control panel Option Description
AF assist
lamp [A]: Controlled by camera.
[OFF]: Does not light.
LED
brightness
[1/1] to [1/16]: Adjust LED brightness.
Slave
flash
[ON]: Flash control display shows slave mode.
[OFF]: Flash control display does not show
slave mode.
Flash
cable [ON]: Flash cable not used.
[OFF]: Flash cable used.
Zoom
display
[ ]: Display values for FOUR THIRDS lenses.
None: Display 35 mm film camera equivalent
values.
Distance
units
[m]: Distances displayed in meters.
[ft]: Distances displayed in feet.
Wide
panel
detection [ON]: Flash detects position of wide panel.
Lighting angle adjusted automatically.
[OFF]: Flash does not detect wide panel position.
Guide
number
display [ON]: Flash output is shown as a guide number.
[OFF]: Flash output is shown as a relative value.
Auto light
sensing
[ON]: The ISO sensitivity and the aperture are
adjusted to match the camera.
[OFF]: The ISO sensitivity and the aperture of
the flash can be adjusted with the dial.
≥ This can only be used for digital cameras with
communication functions. (Only when the flash
mode is set to [AUTO] or [SL AUTO] mode.)
Auto ISO
display
[25] to [3200]: Display the ISO sensitivity when
[AUTO] is selected as the flash mode for
cameras that can not communicate with the
flash unit.
VQT5F44_ENG.fm 16 ページ ２０１４年２月１７日 月曜日 午後２時２２分