Slave mode, Cautions for use, Table of guide numbers (gn) – Panasonic DMWFL580LPP User Manual
Page 18
VQT5F44
18
Slave Mode
The flash can be fired remotely in sync with any flash fired by other units.
1 Set the flash mode to [SL AUTO] or [SL
MANUAL].
“Flash Mode” (P10)
Adjust other flash settings as for [AUTO] or [MANUAL] mode.
“Camera without Communication Functions” (P17)
2 Position the flash.
Flash positioning method is same as the wireless mode.
“Placing Wireless Flash Units” (P13)
Refer to the camera operating instructions for details about
the flash positioning range.
• Set the flash mode of the camera to the manual which
does not fire the pre-flash. If the camera fires the pre-
flash, the external flash synchronizes with the pre-flash of
the camera, and cannot fire the flash light properly.
• The flash may fire in response to flash units used by other
photographers.
Cautions for Use
∫
About the unit
Do not carry the unit when it is still attached to the camera body.
∫
About the batteries
Be sure to remove the batteries when you will not be using the unit for a long
period of time.
Table of Guide Numbers (GN)
∫
[MANUAL]
Flash
intensity
Lighting angle (mm)
7
¢1, 2
10
¢1, 2
12
¢1, 2
14
¢1, 2
12
¢2
14
¢2
17
¢2
1/1
20
22
25
26
30
33
38
1/2
14
16
18
18
21
23
27
1/4
10
11
13
13
15
17
19
1/8
7.1
7.8
8.8
9.2
11
12
13
1/16
5.0
5.5
6.3
6.5
7.5
8.3
9.5
1/32
3.5
3.9
4.4
4.6
5.3
5.8
6.7
1/64
2.5
2.8
3.1
3.3
3.8
4.1
4.8
1/128
1.8
1.9
2.2
2.3
2.7
2.9
3.4
VQT5F44_ENG.fm 18 ページ ２０１４年２月１７日 月曜日 午後２時２２分