Allied Telesis AR44xS series User Manual

Page 15

Advertising
background image

Features in 276-04

15

Version 276-05
C613-10474-00 REV D

CR00012846

ASYN, Log

2

The following issues occurred with sending log messages to an asynchronous
port:

The log messages output on an asynchronous port were corrupt.

When log messages were output to an asynchronous port, that port was
(correctly) locked. However, the port remained locked after the asynchronous
log output definition was destroyed, and after the log output's destination
was changed from asynchronous to something else.

It was possible for a user to change the log output destination to an
asynchronous port while the user was logged into the asynchronous port. This
resulted in the user losing access to the command line interface.

It was possible to create a log output definition with an asynchronous port as
the destination even when another user was logged into that asynchronous
port. This resulted in the other user losing access to the command line
interface.

If a user changed the log output destination to an asynchronous port and
specified invalid parameters in the command, an error message was displayed
but the new output destination was saved anyway.

The set command allowed a user to specify an asynchronous port as the
destination without specifying the asynchronous port number. The number
defaulted to asyn0, which may not have been the desired port.

These issues have been resolved.

Y

-

Y

Y

Y

Y

Y

-

-

-

CR00012868

ENCO

2

Entering the command create enco key=number ip=? caused the router or
switch to reboot.

This issue has been resolved.

Y

-

Y

Y

Y

Y

Y

-

-

-

CR00012951

IPv6

2

RIPng (for IPv6) sometimes sent sub-optimal routes to its neighbours. When
RIPng was configured in a network with loop topology, this could cause unstable
routing table entries on the neighbours (the metric kept being updated, as a
result of updates from neighbours).

This issue has been resolved. RIPng no longer sends sub-optimal routes.

Y

-

Y

Y

Y

-

-

-

-

-

CR

Module

Level

Description

AR

44xS/

AR4

50S

AR

7x5

AR

750S

Ra

p

ier

i

A

T-

8

800

A

T-

8

600

A

T-

8

700XL

A

T-

8

948

A

T-

9

900

A

T-

9

800

Advertising