Allied Telesis AR44xS series - Manual (Page 23)

Features in 276-04 23
Version 276-05
C613-10474-00 REV D
CR00013421 BGP 3 When a user created a BGP module trigger for the peerstate event, the router
or switch did not allow specification of the script or state parameters.
This issue has been resolved. All such generic parameters are now available with
module-specific triggers.
Y - Y Y Y - - - - -
CR00013473
CR00013516
DVMRP 3 Values for some DVMRP settings (including ttlthreshold and metric) were not
saved in the configuration file or output resulting from the commands create
config and show config dynamic. If the router or switch rebooted, the values
were not applied.
This issue has been resolved.
Y - Y Y Y - - - - -
CR00013525 Stack 3 Different versions of the management stacking feature are not compatible with
each other, which means that AT-9924Ts or x900-24XT series switches can only
be stacked with other AT-9924Ts or x900-24XT switches.
This software version includes checks to prevent incompatible software from
being stacked.
- - - Y Y Y Y - - -
CR00013547 VLAN 3 When DHCP snooping was enabled on the router or switch, performing a walk
of the MIB variables in that router or switch could result in incorrect termination
of the walk. This was because certain SNMP packets were incorrectly interpreted
as DHCP packets.
This issue has been resolved.
- - - Y Y Y Y - - -
CR00013714 SSH 3 The router or switch’s SSH server occasionally disconnected an SSH client because
of a checksum error. This occurred because the server did not decrypt the SSH
session key correctly.
This issue has been resolved.
Y - Y Y Y Y Y - - -
CR Module Level Description
AR
44xS/
AR4
50S
AR
7x5
AR
750S
Ra
p
ier
i
A
T-
8
800
A
T-
8
600
A
T-
8
700XL
A
T-
8
948
A
T-
9
900
A
T-
9
800