Allied Telesis AR44xS series User Manual
Page 52
Features in 276-02
52
Version 276-05
C613-10474-00 REV D
CR00011204
IP Gateway
-
This Software Version allows you to add ARP entries with multicast MAC
addresses and allows the router or switch to accept packets with conflicting IP
and MAC addresses. It introduces the enable ip macdisparity and disable ip
macdisparity commands to support this. For more information, see
Static ARP Entries with Multicast MAC Addresses (CR00011204)” on page 67
.
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
CR00011271
Switch,
Utility
-
A new switch filter feature enables you to use a switch filter to make a VLAN
secure without preventing access to other VLANs. For more information, see
“Securing a Single VLAN through Switch Filters (CR00011271)” on page 69
.
-
-
-
Y
Y
Y
Y
-
-
-
CR00011565
ASYN
-
When an asynchronous port is in ten mode, it bundles together the characters
that it receives within a certain time period, instead of passing them one at a time
to a higher protocol layer for processing. The time period over which characters
are bundled is called the ten timer. This enhancement enables you to reduce the
length of the ten timer, to improve response times for remote terminal sessions.
“Making Asynchronous Ports Respond More Quickly
.
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
CR00011615
Switch
-
When a switch port has been given a description, it is now possible to use an
SNMP application to see the port description, through the Interfaces group of the
MIB-II MIB ifDescr OID.
Y
-
Y
Y
Y
Y
Y
Y
Y
Y
CR00011724
BGP
-
You can now display:
■
the number of routes learned from a specific peer, by using the existing
command show bgp peer=ip-address
■
information about each route learned from a specific peer, by using the new
peer parameter in the command show bgp route peer=ip-address
“Displaying Routes Learned from a Specific BGP Peer
.
Y
Y
Y
Y
Y
-
-
Y
Y
Y
CR
Module
Level
Description
AR44x
S /
AR4
50S
AR7x5
AR750
S
Rapi
er
i
A
T-
880
0
A
T-
860
0
A
T-
870
0XL
A
T-
894
8
A
T-
990
0
A
T-
980
0