Allied Telesis AR44xS series - Manual (Page 27)

Features in 276-04 27
Version 276-05
C613-10474-00 REV D
Enhancements
CR Module Level Description
AR
44xS/
AR4
50S
AR
7x5
AR
750S
Ra
p
ier
i
A
T-
8
800
A
T-
8
600
A
T-
8
700XL
A
T-
8
948
A
T-
9
900
A
T-
9
800
CR00011490 MLD,
MLD
Snooping
- Several enhancements have been made to MLD and MLD Snooping, in
accordance with RFC 3810, Multicast Listener Discovery Version 2 (MLDv2) for
IPv6. For details, see
“Enhancements to MLD and MLD Snooping (CR00011490)”
on page 65 .
This CR also fixed some issues in MLD and MLD Snooping; see “CR00011490”
on page 11 .
Y - Y Y Y - - - - -
CR00012015 BGP - BGP backoff has been enhanced in the following ways:
■ in output of the command show bgp backoff, a new field called “command
status” displays “DISABLED” if the backoff feature has been manually
disabled. Otherwise, the field displays “ENABLED”.
■ BGP backoff only operates if at least one BGP peer exists and has been
enabled. If no peers exist, the “backOff state” field displays “PEER
DISABLED”.
Y - Y Y Y - - - - -
CR00012369 IPv6 - Previously, output of the command show ipv6 route displayed the whole IPv6
route table. With this enhancement, this command only displays:
■ all static routes
■ all interface routes
■ RIPng routes that are alive and are the best route for each unique destination
network
To display the whole IPv6 route table, use the new command show ipv6 route
full.
This enhancement makes IPv6 consistent with the route display for IPv4.
Y - Y Y Y - - - - -