Apple ColorLaserWriter 12/600PS - Manual (Page 105)

11 Select another Color LaserWriter 12/600 PS printer, if any, and click OK to install. Repeat
for each printer you want to install.
12 When you’re done, click Close.
A message appears telling you to use the Printers control panel to connect
and set up the printers you’ve installed. By default, each printer uses LPT1.
The Printers control panel Setup dialog lets you specify a different port, for
example, LPT2, or a NetWare queue.
13 Click OK to clear the message.
Another message tells you that installation is complete.
14 Click Restart Windows to have the changes take effect.
The Apple LaserWriter Software program group now appears on your
Windows Program Manager screen. Contained within the program group are
the ReadMe file, Apple Print Monitor for Windows, and the Apple Printer
Utility for Windows.
15 Choose how to proceed:
For users connected via the parallel cable, the default printer driver settings
should suffice.
You can monitor your printer software with Apple Print Monitor for
Windows; see the section “Initial Apple Print Monitor for Windows Setup,”
later in this chapter.
For instructions on using the Apple Printer Utility for Windows, see “Setting
Additional Parameters With the Apple Printer Utility for Windows,” later in
this chapter.
To configure your printer software with NetWare, see “Initial Novell NetWare
Setup,” later in this chapter.
80 Chapter 3