Apple ColorLaserWriter 12/600PS - Manual (Page 62)

Connecting the power and turning on the printer
Once you’ve connected the printer to your networks, you’re ready to start up
the printer. Follow these steps to make sure everything is working correctly.
1 Make sure the printer is turned off.
2 Plug in the printer.
Insert the socket end of the power cord into the receptacle on the back of the
printer. Plug the other end into a grounded (three-hole) AC outlet.
Power cord receptacle
On position Off position
If you can’t tell whether the switch
is in or out, press and release it
once or twice until you’re sure the
switch is out and the printer is off.
37 Setting Up the Color LaserWriter 12/600 PS