Apple ColorLaserWriter 12/600PS - Manual (Page 69)

Before you begin
Before you begin, make sure you have
m set up the printer as described in Chapter 1
m connected the printer to your network
m made backup copies of the printer disks
IMPORTANT To use the printer software, you need a Macintosh with a 68020
or higher central processing unit (any Macintosh except a Macintosh Plus,
SE, Classic
® , Portable, or PowerBook 100). Your Macintosh must have system
software version 7.1 or later and at least 4 megabytes (MB) of memory. If your
system software is an earlier version, you should obtain a system software
upgrade from an Apple-authorized dealer. (You must upgrade every user on
the network who doesn’t have system software version 7.1 or later.)
Installing all the printer software and fonts for the Macintosh requires
approximately 7.5 MB of free space on your hard disk.
Initial AppleTalk setup
Before Macintosh users can print with the Color LaserWriter 12/600 PS, the
printer administrator must install the printer software and fonts and configure
the printer.
Chapter 2 44