Apple ColorLaserWriter 12/600PS - Manual (Page 155)

130 Chapter 5
Installing the optional 250-sheet feeder
Follow these instructions for installing the 250-sheet feeder. For instructions
on loading the feeder with paper, see “Loading the Optional 250-Sheet
Universal Cassette” in Chapter 9.
The cassette base adds approximately 4 inches to the height of the Color
LaserWriter 12/600 PS. Begin by selecting a location for the printer that
provides enough room to accommodate the increased height of the printer.
If you intend to keep the printer in its current location, make sure that
adequate room will be available for opening the top cover, loading paper, and
maintaining the printer. You will also need to move the printer temporarily
from its current location to place the cassette base in its place. When moving
the printer, be sure to place it on a strong, stable surface that can support its
weight.
1 Turn off and unplug the printer.
Also, make sure the printer is disconnected from your computer or network.
2 Unpack the 250-sheet feeder and remove any packing materials within the base and
paper cassette.
WARNING To install the 250-sheet feeder, you must place the Color
LaserWriter 12/600 PS on top of the cassette base. Because of the
printer’s weight, it’s recommended that you have two people lift the
printer. Aligning the printer on the 250-sheet feeder base is easier when
two people are lifting the printer.