Apple ColorLaserWriter 12/600PS - Manual (Page 127)

Identifying the printer’s physical location
You can type a description of the printer’s location.
1 Click the triangle for the Printer Preferences category.
You see a list of preferences.
2 Open the Location category.
3 In the panel that appears, type a description of the printer’s location.
4 To send the setting to the printer, click Send.
Printing font samples
You can print samples of the PostScript fonts currently stored in the printer’s
memory (both RAM and ROM) and on optional hard disks attached to the
printer.
m
Choose Print Font Samples from the File menu.
Turning the startup pages on or off
The Color LaserWriter 12/600 PS normally prints a startup page and a
demonstration page when you turn the printer on. The startup page shows the
printer’s name(s), the total number of pages printed, the amount of memory,
and communication settings. You can turn either or both pages off if you
wish.
1 Click on the triangle for the Printer Preferences category.
You see a list of preferences.
2 Open the Startup Pages category.
3 In the panel that appears, click the checkboxes to turn the startup page and
demonstration page on or off.
An X in a checkbox means the printer is set to print the page.
4 To send the setting to the printer, click Send.
102 Chapter 3