Panasonic MotionSD STUDIO 1.0E - Manual (Page 11)

- 11 -
Before use
Please read the following first
∫ About usable file formats
This software allows the following file formats to be
input and edited, or output:
• MPEG2 format files are limited to files recorded with
the SD Video Camera with which this software is
supplied and files created with this software.
• Some files in the above file format may not be used.
∫ Compliant disc/DVD drives
DVD R/RW
12 cm and 8 cm DVD R/RW discs and 12 cm +R DL
discs can be written to.
• DVD-R DL discs are not compatible.
DVD-RAM
UDF 2.0 formatted 4.7 GB/9.4 GB DVD-RAM discs and
8 cm DVD-RAM discs can be written to.
Use generally available video recording DVD-RAM
discs or format the discs using a DVD video recorder or
software compatible with DVD-RAM disc.
• A single-sided 2.6 GB or double-sided 5.2 GB
DVD-RAM disc cannot be used.
• A DVD video recorder or software compatible
DVD-RAM discs are required for DVD-RAM disc
playback.
• Before using, enable “Synchronous data transfer” or
“DMA” for the DVD-RAM drive.
This product is licensed under the MPEG-4 Visual
patent portfolio license for the personal and
non-commercial use of a consumer for (i) encoding
video in compliance with the MPEG-4 Visual
Standard (“MPEG-4 Video”) and/or (ii) decoding
MPEG-4 Video that was encoded by a consumer
engaged in a personal and non-commercial activity
and/or was obtained from a video provider licensed
by MPEG LA to provide MPEG-4 Video. No license is
granted or shall be implied for any other use.
Additional information including that relating to
promotional, internal and commercial uses and
licensing may be obtained from MPEG LA, LLC. See
http://www.mpegla.com.
Input/Edit Output
MPEG2/BMP/JPEG/
WAV
(uncompressed)
MPEG1/MPEG2/ASF