Panasonic MotionSD STUDIO 1.0E - Manual (Page 146)

Output mode
- 146 -
File output mode
[High Compression]
This option provides image quality inferior to
[Standard], but makes the file size smaller than that
of [Standard].
D. When [MPEG2] is selected as the output format (C),
the screen aspect ratio can be set.
• When the aspect ratio is different from the original
data, a black area is displayed above and below
and to the right and left of the image. (
@ 56 )
[4:3 Normal]
Output at the normal 4:3 aspect ratio.
[16:9 Wide]
Output at the wide 16:9 aspect ratio.
• When [16:9 Wide] is set with a [MPEG2 format
hybrid rendering (partialencoding)] as the output
format, you may not be able to use the output file
with other MPEG2 wide display compatible editing
software or players. When another MPEG2 wide
display compatible editing software or player is
used, select [MPEG2 format selection
(re-encoding)] and uncheck the [Use with MotionSD
STUDIO] checkbox (H).
E. When [MPEG2 format selection (re-encoding)] is
selected as the output format (C), the output speed
can be set.
[Fast]
Faster than [Normal] output
However, depending on the output data, the quality
of the video may be affected.
[Normal]
Standard output speed.
Video quality is higher than for [Fast] output.
F. Starts file output.
G.Displays the detailed information of the file to be
output.
H. When [MPEG2 format selection (re-encoding)] is
selected as the output format (C) and [16:9 Wide] is
set for the aspect ratio (D), the file output is specified
as follows.
If checked:
The output file is in a format supported by
MotionSD STUDIO.
You may not be able to use the output file with
other MPEG2 wide display compatible editing
software or players.
If unchecked:
The output file is in a format supported by other
MPEG2 wide display compatible editing software
or players.
I. Exits the File output mode.
J. Displays whether or not file output is currently ready,
and other information. [Please select the input file(s)]
or another message is displayed as an operating
guide.
If you have selected an output format, the description
of that format is displayed.