Panasonic MotionSD STUDIO 1.0E - Manual (Page 217)

Q&A
- 217 -
Writing to DVD R/RW disc is not successful.
be played even if writing to the media has been
completed normally. After writing, be sure to check
that the media plays normally.
• Do not under any circumstances use other writing
applications while output processing. This may result
in disc write failure and destroy the disc.
In particular do not use other applications which
require a DVD R/RW drive (Drag’n Drop CD
TM , B’s
Recorder GOLD TM , etc.), applications for recording
or applications that have a high CPU utilization rate
and consume a large amount of memory e.g. MPEG
encoding.
• If writing software made by companies other than
Panasonic or ASPI drivers supplied with scanners,
printer, etc., writing on a DVD disc may not be
completed properly. In this case, uninstall other
applications (ASPI driver) and then reinstall
MotionSD STUDIO.
• This software may not operate normally depending
on the condition of the drive where the OS is
installed or the drive designated as the work drive.
Analyze the condition of the hard disk, and defrag it
when necessary.