Panasonic MotionSD STUDIO 1.0E - Manual (Page 216)

Q&A
- 216 -
Writing to DVD R/RW disc is not successful.
Writing to DVD R/RW disc is not
successful.
Additional data cannot be written to DVD R/RW
discs with existing data.
• This software does not support writing additional
data to DVD R/RW discs with existing data.
The message [The disc space is insufficient.]
appears and the data cannot be imported.
• Writing cannot be performed because the volume of
the data exceeds the maximum capacity of the DVD
R/RW (
@ 166 ) in the drive.
Release the registration of the registered file or
change to a lower image quality settings in file
output mode, re-save the data to the library and then
write to DVD R/RW disc.
The drive is not recognized, or the message [No
drive] is displayed.
• Select [start] >> [My Computer] (or double-click [My
Computer] on the desktop), and check whether the
drive has been recognized or not.
• If writing software made by companies other than
Panasonic or ASPI drivers supplied with scanners,
printer, etc., writing on a DVD disc may not be
completed properly. In this case, uninstall other
applications (ASPI driver) and then reinstall
MotionSD STUDIO. (When uninstalling or installing
MotionSD STUDIO, follow the instructions on the
screen, and reboot the personal computer without
fail.) When multiple DVD drives are connected, they
may not be recognized properly.
When data is being written to a DVD disc, an error
occurs.
• Data sometimes cannot be recorded satisfactorily
due to poor compatibility between the drive and disc.
Use discs recommended by the manufacturer.
Depending on media used, media sometimes cannot
Methods for solving common problems when writing files
to DVD R/RW discs.