Panasonic MotionSD STUDIO 1.0E - Manual (Page 176)

Output mode
- 176 -
DVD-RAM output mode
Outputting to DVD-RAM disc
On activating VRWriter, insert a DVD-RAM disc into the
drive and start the output.
Action Required
` While writing, do not carry out the following operations. If
they are carried out, writing will not be performed
correctly and the DVD-RAM disc may be damaged.
• To switch OFF or restart the system.
• To switch users or log off.
• To change the screen setting, etc.
Note
` The file resulting from recording to the DVD-RAM disc is
called “Title”.
` A maximum of 99 titles can be recorded on one side of a
DVD-RAM disc. However, the number of titles which can
be recorded on a DVD-RAM disc with titles already
recorded is equivalent to 99 minus the number of titles
already recorded.
1. Insert a UDF 2.0 formatted DVD-RAM disc into
the DVD-RAM drive.
2. Select the target drive to be written in .
Select the DVD-RAM drive in which the DVD-RAM disc
was inserted.
3. Click then click [Yes].
The data is be written to DVD-RAM disc.
4. Click .
Exits VRWriter.