Panasonic MotionSD STUDIO 1.0E - Manual (Page 79)

Edit mode
- 79 -
Non-linear edit mode
∫ [Clock wipe 1 ]
The current screen is wiped as if
a clock hand moves for the
subsequent screen to appear.
∫ [Clock wipe 2]
The current screen is wiped as if
a fan is flicked open for the
subsequent screen to appear.
∫ [Cross wipe ]
Clock wipe 2 takes place at the
top and bottom simultaneously
for the subsequent screen to
appear.
∫ [Corner wipe]
The subsequent screen starts to
appear at the top left corner of
the current screen extending
towards the other three corners.
∫ [Corner slide ]
The subsequent screen starts to
appear at the top left corner of
the current screen extending
towards the bottom right corner.
∫ [Corner zoom]
The subsequent screen starts to
appear at the top left corner of
the current screen zooming up
towards the bottom right corner.
∫ [Corner both slides]
The 2 screens slide from the top
left towards the bottom right
simultaneously until the
subsequent screen fully
appears.
∫ [Corner both zooms]
The current screen is zoomed
out towards the bottom right,
while the subsequent screen is
zoomed in from the top left.