CatEye e-TrainData™ Ver.3 [Power Unit Edition] - Manual (Page 18)

18
e-Train Data V3
CHANGING THE CC-TR100 SETTINGS VIA THE PC
Connect the Download Unit to your PC, and turn it on.
1. First follow the instructions 1-5 for 'Downloading Data' on page 15.
2. After connecting the TR100 to your PC, click the “Set up” button to display the settings stored in the PC.
The following functions are available in the CC-TR100 setting change window:
CC-TR100 settings ----------- These settings here are the same as in the CC-TR100 menu function. Changes
made here will be applied to the CC-TR100.
Modify Data and Time ----------- When marked, continually adjusts the date and time of CC-TR100 to the internal
clock of the PC.
Reset -------------------------- Restores the previous settings.
Set ----------------------------- Applies settings to the CC-TR100 and closes the window.
Cancel ------------------------- Cancels the settings and closes the window.
3. Click the “Set” button to apply the settings to CC-TR100.
NOTE
If the data are not reset, settings for certain items may be restricted, including the following:
• Basic: Unit, Interval, Tire circumference A and B
• Zone: HR Zones 1 to 4, and the Upper/Lower limit of the CDC Zone
Cancel
CC-TR100 settings
Modify Data and Time
Set Reset