Changing user settings, Exiting e-train data ver. 3 – CatEye e-TrainData™ Ver.3 [Power Unit Edition] User Manual
Page 47
47
e-Train Data V3
Changing user settings
Click the
[User]
button in the Setup window to open the user setting change window.
Here you can register user information or change settings for extra zones.
IMPORTANT!
The zone settings in this window only apply to the extra zones of e-Train Data Ver.3. They are independent of
the zone settings of CC-TR100.
The following functions are available in the user setting change window:
Graph -------------------- Opens the e-Train Data Ver. 3 setting change window.
User ---------------------- Disabled as you are already in this window.
User list ----------------- Displays a list of registered users. To edit settings, select a user and reset zone values.
Add User ---------------- Creates a new user.
Delete User -------------- Deletes the selected user from the user list.
Edit User ---------------- Changes the name of the user selected from the user list.
Zone List ---------------- Displays the current zone range set by the user selected from the user list and
allows editing of the range. Also allows the user to choose whether to display or hide
the data in the Data Zoom Window by checking/unchecking a check box.
In order to edit the zone range, click-drag the upper or lower edge of a graph in the
zone list or, alternatively, click on the value of the upper or lower limit and directly
enter a new value.
Heart rate ---------------- Displays the heart rate zones in the zone range.
Cadence ----------------- Displays the cadence zones in the zone range.
Power -------------------- Displays the power zones in the zone range.
Close --------------------- Saves and closes the Setup window.
Example: When the upper limit is changed from 180 to 200
Close
Add User
User
Graph
Delete User
Edit User
Zone range
User list
Drag the upper edge
Before change
After change
Heart rate
Cadence
Power
EXITING e-Train Data Ver. 3
To exit e-Train Data Ver. 3.
1. Click
[Exit]
on the File menu.
e-Train Data Ver. 3 closes.
Click on the value
and enter “200”