ADC MM701G2 - Manual (Page 27)

April 14, 2006 Chapter 3: Provisioning
MM70xG2-UM-03 3-3
Step Action
1 Select LAN on the menu bar, then select DNS Relay under LAN Options to access the DNS Relay
mode page (
Figure 3-2 ).
Figure 3-2. DNS Relay Mode Page
2 Select Enabled, then click Configure to access the following DNS: Enable Relay page ( Figure 3-3 ).
Figure 3-3. DNS Enable Relay Page
3 Enter the DNS server IP address for the device to which the modem will forward IP address resolution
requests.
4 Click Apply.
Note: If DHCP Client is selected (see “Configure the LAN” on page 3-1 ) and a DNS server IP
address assigned, then DNS: Enable Relay is automatically enabled and the DNS server IP
address automatically displayed in that field.