Access through the console port, Figure a-2. com1 properties – ADC MM701G2 User Manual
Page 91
Appendix A: Command Line Interface Access
A-3
Access through the Console Port
Access the terminal emulation program (HyperTerminal, Teraterm, ProComm) to establish a connection to the
modem command line interface. The following procedure uses HyperTerminal as the example terminal emulation
program. If you are using another terminal emulation program, refer to the user documentation for instructions.
Step
Action
1
From the Start button, select Programs | Accessories | HyperTerminal.
2
In the HyperTerminal dialog, select File | New Connection.
3
Enter a name for this connection and click OK.
4
For Connect using, select the COM port (typically COM1) on the PC to which you have connected the
modem (console port connection), then click OK. The COM1 Properties dialog (
) is displayed.
Figure A-2. COM1 Properties