ADC MM701G2 - Manual (Page 61)

April 14, 2006 Chapter 6: Configuring DSL Parameters
MM70xG2-UM-03 6-5
2
(cont.)
• Test Bit Rate
This bit rate is used by the manufacturer for internal use only.
• SNR Margin Limit
Identifies the minimum SNR margin (in decibels) that must exist when the G.shdsl connection is
synchronized and in order for the DSL MAR LED to be lit ON Green. The range of values is -64 to 63.
The default value is 6.
3 Click Apply then save changes using “Saving Changes” on page 5-12 .
Step Action