Pulsafeeder Eclipse Model 75 - Manual (Page 36)

30
Figure 35
5. Remove bearings (item 10), gear/shaft assemblies (items 12, 13) and housing liner (item 11) as shown. These
parts, along with the four o-rings make up a standard Eclipse Standard/Eclipse Hypo Series KOPKit. Check
parts for wear and replace with a KOPKit as required.
Figure 36
6. Remove the eight mounting bolts and washers (items 16, 17) holding the center housing (item 14) to the
motor spool (item 20). Detach the center housing and retaining plates (item 35).
7. Remove all o-rings from the center housing and front cover. There is one o-ring in the center housing (item
15) and two in the front cover (items 6, 9) as shown.