Pulsafeeder Eclipse Model 75 - Manual (Page 8)

2
2. Equipment Inspection and Storage
Check all equipment for completeness and accuracy against the order and for any evidence of
shipping damage. Shortages or damage should be reported immediately to the freight carrier and
to your Pulsafeeder representative.
If the pump is not going to be installed immediately, the following steps should be taken:
 Leave pump in original shipping carton.
 Store indoors in a dry ambient atmosphere. Avoid temperature variations.
 Leave all shipping plugs in place.
 Contact the motor manufacturer for specific motor storage information.
These instructions should be read carefully by the personnel responsible for installation, operation and
maintenance of the equipment and kept in a convenient place for ready reference. It is recommended that a copy
of the order documents be kept with this manual as well as a written record of the pump model and serial number,
which is on the nametag attached to the pump.
Figure 1