Vaddio ProductionVIEW HD-SDI - Manual (Page 17)

ProductionVIEW HD-SDI
Compliance and CE Declaration of Conformity
FCC Part 15 Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his/her own expense.
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2)
This device must accept any interference including interference that may cause undesired operation of
the device.
Changes or modifications not expressly approved by Vaddio can affect emission compliance and could
void the user’s authority to operate this equipment.
ICES-003 Compliance
ICES-003, Issue 4: 2004
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus
set out in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’emet pas de bruits radioélectriques dépassant les limites applicables
aux appareils numeriques de la classe A préscrites dans le Règlement sur le brouillage radioélectrique
édicte par le ministère des Communications du Canada.
European Compliance
This product has been evaluated for Electromagnetic Compatibility under the standards for Emissions
and Immunity and meets the requirements set forth by EMC Directive 2004/108/EC for an E4
environment. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
Standard(s) To Which Conformity Is Declared:
EMC Directive 2004/108/EC
EN 55103-1: 1996 - Electromagnetic Compatibility
EN 55103-2: 1996 - Immunity Requirements, Electromagnetic Environments
EN 61000-3-2:2006 - Limits for Harmonic Current Emmissions
EN 6100-3-3: 1995 + A1: 2001 + A2: 2005 - Limitation of Voltage Changes and Fluctuations
EN 61000-4-2: 1995 + A1: 1998 + A2: 2001 - Electrostatic Discharge
EN 61000-4-3: 2002 - Radiated Immunity
EN 61000-4-4: 2004 - Electrical Fast Transients
EN 61000-4-5: 1995 + A1: 2001 - Surge Immunity
EN 61000-4-6: 1996 + A1: 2001 - Conducted Immunity
EN 61000-4-11 Second Edition: 2004 - Voltage Dips, Interrupts and Fluctuations
Annex A of EN 55103-2: 1996 - Magnetic Field Immunity
ProductionVIEW HD-SDI Manual 341-852 Rev. B Page 17 of 22