Vaddio ProductionVIEW HD-SDI User Manual
Page 3
ProductionVIEW HD-SDI
• Camera Auto-Sensing - The ProductionVIEW HD-SDI is capable of auto-sensing each PTZ camera
attached. Control codes for the following cameras are built-in:
• Vaddio WallVIEW CCU and PRO Series Cameras *
• Sony EVI-HD1, & Sony BRC-300, BRC-Z700 & BRC-H700 *
• Panasonic AW-HE100 *
• Canon BU-45H & BU-50H
* Most cameras require an optional SDI card
• Video Transitions
Video transitions are seamless with exceptional video quality. Transition time is adjustable from zero
(0) to four (4) seconds and include:
• Cross Fades (one image fades into another)
• Wipes (9 different patterns)
• Straight Cuts
• Fade To Black (by pressing, and holding the MIX/FTB button)
Intended Use:
Before operating the Vaddio ProductionVIEW HD-SDI, please read the entire manual thoroughly. The
system was designed, built and tested for use indoors, and with the provided power supply and cabling.
The use of a power supply other than the one provided or outdoor operation has not been tested and
could damage the camera and/or create a potentially unsafe operating condition.
Save These Instructions:
The information contained in this manual will help you install and operate your Vaddio ProductionVIEW
HD-SDI. If these instructions are misplaced, Vaddio keeps copies of Specifications, Installation and User
Guides and most pertinent product drawings for the Vaddio product line on the Vaddio website. These
documents can be downloaded from
free of charge.
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or
damaged. In this case, a Vaddio technician must examine the product before operating. To reduce the
risk of electric shock, do not immerse in water or other liquids and avoid extremely humid conditions.
UNPACKING:
Carefully remove the device and all of the parts from the packaging.
Unpack and identify the following parts:
• One (1) ProductionVIEW HD-SDI Camera Control Console
• One (1) Vaddio PowerRite 18 VDC, 2.78A Power Supply
• One (1) Vaddio AC Cord Set (US or Euro/UK)
• DVD ROM with templates and sample graphics for Lower Screen Graphics*
• Documentation and Manuals
* User must supply their own compatible version of Keynote or PowerPoint to display and modify templates on the DVD ROM.
Use only the power supply provided with the ProductionVIEW HD-SDI
system. Use of any unauthorized power supply will void any and all
Do not use “pass-thru” RJ-45 connectors. Use standard RJ-45
connectors for best results.
ProductionVIEW HD-SDI Manual 341-852 Rev. B
Page 3 of 22