Vaddio ProductionVIEW HD-SDI User Manual
Page 4
ProductionVIEW HD-SDI
ProductionVIEW HD-SDI
Figure 2):
1. Focus and Iris Controls: Focus and Iris can be adjusted from knobs on the console for real-time
control of these critical functions, when their respective Auto buttons are turned off. Auto White
Balance (AWB) and Backlight Compensation (BLC) functions are also available for compatible PTZ
cameras.
2. Single Bus or Dual Bus Switching: ProductionVIEW HD-SDI can be configured as Program and
Preview buses or as discrete video outputs (i.e. one for high resolution IMAG and the other for
delivery to a recording or streaming device).
3. Lower Screen Graphics: Insert “lower third” and other graphics, through our unique LSG function.
A variety of sizes and transparency levels are available through buttons on the console. Note: An
analog RGBHV to SDI converter box is required if using a computer for graphics.
4. Picture-In-Picture: Insert video in any quadrant of the program video output to add impact to your
live production. The PIP can be adjusted to three different sizes.
5. Wipe, Fade, Cut, Transition Speed and Fade to Black: Select a variety of wipe patterns, mix or cut
from buttons on the control console. The Fade to Black (FTB) feature allows the Program output to
fade to black. Transition Speed allows a wipe or fade transition to be adjusted up to 4 seconds.
6. Take Button: Pressing the Take button switches the input selected from Preview to Program
in
Single Bus mode. In Dual Bus mode, it switches the input to the input that is flashing.
7. Joystick PTZ Camera and Speed Controls: Sony, Canon and Vaddio PTZ cameras can be
controlled via the 3-axis Hall-Effect joystick built into ProductionVIEW HD-SDI. Adjustable knobs for
Pan, Tilt and Zoom speeds. When the button on top of the joystick is pressed, it will reposition the
selected camera to its home position.
8. Camera Selector and Presets: Select a camera from the top row of buttons, and program (or recall)
up to 12 preset shots per camera, using the camera preset control buttons.
9. Menu and LCD Screen: The internal menu allows the user to configure the resolution on the
outputs, as well as other parameters built into the console. See pages 13 to 16 for the menu
structures and programmable functions.
10. Manual and Automatic Modes: In addition to a manual or “operator” mode there is an Automatic
Camera Switching mode for PTZ camera presets assigned to Vaddio input triggers like the
StepVIEW™ mats, AutoVIEW™ IR or TouchVIEW™ buttons.
1
2
3
4
5
6
7
10
8
9
ProductionVIEW HD-SDI Manual 341-852 Rev. B
Page 4 of 22