Vaddio ProductionVIEW Super Joystick - Manual (Page 4)

ProductionVIEW Super Joystick
ProductionVIEW Super Joystick Manual 341-565 Rev. B Page 4 of 16
ProductionVIEW Super Joystick Front Panel Controls (Figure 2):
1) MASTER POWER (system on/off)
2) EXTERNAL VIDEO A
• Selector Switch assigns External Video Input A to the Built-in 4” LCD Monitor
3) EXTERNAL VIDEO B
• Selector Switch assigns External Video Input B to the Built-in 4” LCD Monitor
4) EXTERNAL CONTROL A
• For controlling external devices via tally contacts (contact closure) or RS-232
5) EXTERNAL CONTROL B
• For controlling external devices via tally contacts (contact closure) or RS-232
6) HALL EFFECT JOYSTICK
• Pan (left, right), Tilt (up, down), Zoom (twist +, -) Camera Control
7) CAMERA CONTROLS
• Brightness (+, -) and Focus (Far, Near) controls
8) CAMERA CONTROLS
• BLC – Back Light Compensation and AWB – Automatic White Balance
9) CAMERA SELECTION
• Selects camera to be controlled by the Joystick and camera controls (brightness, focus, etc.)
10) CAMERA PRESETS
• Twelve (12) camera presets per camera can be saved under the Camera Preset switches
• In “6InCam 6Loca
l” , Presets 1 - 6 are stored in the cameras & 7 - 12 are stored internally
11) LCD DISPLAY CONTROLS (recessed mini screw driver adjustments on front edge)
• Left Adjustment - Color Saturation (up, down), Right Adjustment - Brightness (up, down)
12) MENU CONTROLS
• Select, up, down and Cancel used to navigate menu system (see pages 9 & 10)
13) LCD Display for Menu Control
• See Appendix 1 for detailed description
14) 4” LCD PREVIEW MONITOR
• Select between EXTERNAL VIDEO A and EXTERNAL VIDEO B inputs
1 2 4
5
6
9 8 10 12 11
14
7
3
13