Vaddio ProductionVIEW Super Joystick - Manual (Page 9)

ProductionVIEW Super Joystick
ProductionVIEW Super Joystick Manual 341-565 Rev. B Page 9 of 16
ProductionVIEW Super Joystick Menu System Structure
The ProductionVIEW Super Joystick has a back lit, 2-line LCD
that displays the system menus. The menus are traversed with
the up/down arrows, select and cancel buttons. The menu
structure is as follows:
Menu Structure:
1 st Screen ProductionVIEWSJ
T01.00.01
Rescan Cameras
>Select
>Start - Rescans control ports 1 through 6 to find the cameras connected
Rescan is required if a change is made to the inputs of the ProductionVIEW
Default Camera
>Select
> 01 – 06
Selects camera 1 through 6 as the default camera (default is 01)
Default Preset
>Select
> 01 – 12
Assigns camera preset 1 through 12 as Default Preset on the default camera (default is 01)
PanSensitivity
>Select
>01 – 24
Sets the pan sensitivity of the joystick - Lowering the value reduces joystick sensitivity (default is 24).
TiltSensitivity
>Select
>01 – 24
Sets the tilt sensitivity of the joystick - Lowering the value reduces joystick sensitivity (default is 24).
Pan Speed
>Select
>01 – 24
Sets the Pan Speed on all cameras between internally stored camera presets only (24 is fastest) (default is 18)
(This parameter does not affect the Pan Speed or Pan Sensitivity of the Joystick)
Pan Direction Menu
>Select
>All Ports: Normal or Invert (default is Normal) Inverts the Joystick Pan Direction (Inverted - left = right)
>Port 01: Normal or Invert
>Port 02: Normal or Invert
>Port 03: Normal or Invert
>Port 04: Normal or Invert
>Port 05: Normal or Invert
>Port 06: Normal or Invert
>Return to Main
Set this for the requirements of the Pan/Tilt Head or camera used on a per port basis
Tilt Speed
>Select
>01 – 20 (default is 15)
Sets Tilt Speed on all cameras between internally stored camera presets only (20 is fastest).
(This parameter does not affect the Tilt Speed or Tilt Sensitivity of the Joystick)
Tilt Direction
Tilt Direction Menu
>Select
>All Ports: Normal or Invert (default is Normal) Inverts the Joystick Tilt Direction (Inverted - up = down)
>Port 01: Normal or Invert
>Port 02: Normal or Invert
>Port 03: Normal or Invert
>Port 04: Normal or Invert
>Port 05: Normal or Invert
>Port 06: Normal or Invert
>Return to Main
Menu
Section