Vaddio WallVIEW HD-18W - Manual (Page 3)

WallVIEW HD-18
WallVIEW HD-18 Manual 341-888 Rev. D Page 3 of 16
UNPACKING:
Carefully remove the device and all of the parts from the packaging.
Unpack and identify the following parts:
 One (1) WallVIEW HD-18 Camera
 One (1) Quick-Connect SR breakout box
 One (1) Vaddio PowerRite™ 24 VDC, 2 Amp Power Supply
 One (1) EZCamera™ Control Adapter (RJ-45 to DB-9)
 One (1) CONCEAL Wall Mounting System and Mounting Hardware
 One (1) AC Cord Set (US - North America or UK & Europe - International)
 Documentation and Manual
1. Camera – A 1/3”, 1.3 megapixel HD image sensor is combined with an 18x optical zoom lens, for
capturing high-quality video.
2. Tally Light – A tally light is illuminated when the camera receives a VISCA command from an
external control system and tally is triggered.
3. IR Sensors – Dual IR sensors are built into the front of the WallVIEW HD-18 to receive IR signals
from the IR remote control supplied with the camera.
4. Power Light – A power light is illuminated when the camera is turned on.
Compatible Switchers and Joystick Controllers:
Figure 3: WallVIEW HD-18 camera (back)
Figure 3: WallVIEW HD-18 camera (back)
Figure 2: WallVIEW HD-18 camera (front)
Front of WallVIEW HD-18
1
2 4
3
ProductionVIEW HD
(999-5600-000)
Precision Camera Controller
(999-5700-000)
ControlVIEW XHD
(999-5672-000)