Specifications – NOVUS AirGate-GPRS User Manual

Page 7

Advertising
background image

AirGate-GPRS

NOVUS AUTOMATION

7/29

SPECIFICATIONS

Power Supply: 10 to 35 Vcc. Maximum consumption: 150 mA @ 24 V.

Environmental Conditions: Operation Temperature: -10 to 50 °C. Relative Humidity: 80 % up to 30 °C. For
temperatures higher that 30 °C, lower 3 % per °C.

Internal use.

Installation category II.

Pollution level II.

Altitude < 2000 m.

Dimensions: 114 x 99.5 x 17.5 mm

Weight:

Without antenna: 114 g

With antenna: 174 g

Enclosure: PA66, with metallic attachment for 35 mm DIN track.

Internal protection against polarity inversion of the power supply voltage.

Wire section used: AWG 28 a 12.

Recommended torque: 4 kgf·cm.

Analog Entries:

The types of entry signals accepted by AirGate-GPRS and their minimum measurement bands are selected in the
Configuration software and are listed in the following table.

TYPE OF INPUT

MEASUREMENT RANGE

EXACTNESS

Linear 4 to 20 mA

Configurable

± 1.0 % (F.E.) *

Linear 0 to 10 V

Configurable

± 1.0 % (F.E.) *

F.E. = Scale Background = Span

(*) Note: he background scale is in regards to the input of the sensor’s signal and not the configured recommended range.

Table 01 – List of signals accepted by AirGate-GPRS

Although the analog inputs can recommend a bit beyond the limits of the configured range, the specification is not
guaranteed outside the range.

Impedance of the analog channel input:

mA: 150 Ω + 1.5 V

V: 670 kΩ

Digital Entries:
• Logical level “0”: from 0 to 0.8 Vdc
• Logical level “1”: from 2 to 6 Vdc

GPRS Interface:

GSM/GPRS Technology, class 8 to 12 (GRRS device class B)

Quad Band GSM operation range (850 MHz, 900 MHz, 1800 MHz and 1900 MHz)

Output power:

1 W (GSM 1800/1900)

2 W (EGSM 850/900)

RF Tx Power: +30 dBm

RF Rx Sensibility: bether than -100 dBm

Output for antenna GSM: impendency 50

Ω, SMA plug

USB Interface:

Mini-B type USB connector. Compatible with USB 3.0, 2.0 and 1.1.

Isolation of 600 V between the USB interface and the rest of the circuit (power, RS485 and analog/digital inputs).

Certifications: ANATEL (1534-13-7089)

Advertising