Creating a historic, Including a historic list type object – NOVUS superview User Manual
Page 19
NOVUS AUTOMATION
19/38
CREATING A HISTORIC
The tags that will take part in the historic and the name of the file that will store data are defined in this configuration. For
this purpose, follow the procedures described below:
1.
Open the CONFIGURE window by clicking the
button on the upper tool bar.
2.
Double click the HISTORIC icon. The HISTORIC CONFIGURATION window will be displayed.
3.
Click the NEW button and the HISTORIC PROPERTIES window will be displayed. Examples of these two windows
are shown below.
4.
In the HISTORIC tab, assign a name and a title to the historic. The name will be used to identify the historic in
further steps in the SuperView set up. To locate the file click on the icon. In the Color Template option you can
choose a pre-set color template to visualize the historic chart.
5.
In the TAGS tab, select from the right list the tags to be logged in this historic. Use the movement buttons placed
between the lists to insert or remove tags to/from the historic. Define the sampling rate, which determines the time
interval between logs in the historic file.
6.
After entering all these information, press the OK button and check whether the new historic has been added to the
list of the HISTORIC CONFIGURATION window.
7.
To change data of an existing historic, select the historic from the list in the HISTORIC CONFIGURATION window
and press the CHANGE button.
INCLUDING A HISTORIC LIST TYPE OBJECT
The effective register of a historic is only possible when an object of this type is position and parameterized in one of the
application form. For this purpose, follow the procedures described below:
1.
Create a new form or edit an existing one (see chapter “Creating supervision form”).
2.
Select the Historic List object –
from the lower tool bar.
3.
Place this object on the form and right-click on it to visualize your properties window called CONFIGURE LIST OF
HISTORIC. The following figure shows the two main tabs of this object configuration.
4.
In the HISTORIC LIST tab, select from the right list the historic that shall be included in this object. Use the
movement buttons located between the lists to place or remove a historic from the list. Historics with a checked box
(
) will be enabled as soon as the SuperView application is started. Historics with an unchecked box () will not
be enabled as soon as the SuperView application is started. To check and uncheck a historic box, click on the
mouse on the box.