Glastender GW24 - Manual (Page 12)

10 Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
s
lIde
-
out
c
hemIcal
b
ottle
r
ack
I
nstallatIon
Stationary
bottom tray
Slide-out chemical
bottle holder
A slide-out chemical bottle rack
accessory is available for easy-
access storage of chemical bottles.
Specify part number 01001500.
The chemical bottle rack accessory consists of two parts
- a stationary bottom tray and a slide-out chemical bottle
holder.
To install the chemical bottle rack onto the GW24:
1. Remove the screw located
at the front of the station-
ary bottom tray and set
aside. Pivot the hinge fully
to open the securing clasp.
2. Position the back rear semi-circular cutout of the tray
around the back left leg of the GW24. Slide the front
securing clasp around the front left leg of the GW24.
3. Close the securing clasp around the front leg and
reinstall the screw.
4. Place the slide-out chemical bottle holder into the
stationary bottom tray.
5. The front cover of the chemical tray can be adjusted
vertically to fine-tune the fit beneath the GW24 skin.
To adjust, loosen the 3 attachment screws on the
inside of the front cover. Move the cover up/down.
Once the cover is at the desired height, retighten the
attachment screws.
Back
Front
Attachment
screws
Adjust the
front cover
up or down