Rugged Ridge PowerTop Kit, 07-14 Jeep Wrangler Unlimited (JK), Black - Manual (Page 27)

Section E Page 25
43
©2012
Attach the wire to the battery’s positive side.
Shock/Fire/Chemical Hazard: Confirm area
free from gasoline and other flammable
vapors. Avoid bridging terminals with metal
tools. Wear gloves and eye protection.
Re-connect the battery to the vehicle by first attaching
the positive then the negative cables.
Shock/Fire/Chemical Hazard: Confirm area
free from gasoline and other flammable
vapors. Avoid bridging terminals with metal
tools. Wear gloves and eye protection.
Test the electrical system of the Power Top to confirm
that it is correctly working. Please refer to the
operational checklist found on page 3.
Limit switches not installed at
this point for purposes of testing and adjustment.
To avoid damage, carefully watch the motion of the
top. Lift off the switch before reaching the full up or
down position.
Hold down your brake then press the left side of the
switch to open the top. Press the right side of the
switch to close the top.
41
42
WARNING !
WARNING !
Please refer to page 1-2 for further information on safety.
WARNING ! !
Entanglement & Pinch Hazards
CAUTION !