Rugged Ridge PowerTop Kit, 07-14 Jeep Wrangler Unlimited (JK), Black User Manual
Page 41
SECTION - I - Adjusting the Limit Switches and Attaching the Rear Guards
Section I
Page 39
©2012
Section Description- This section will illustrate how to adjust the limit switches and how to attach
the rear guards.
Tool Needed -
Phillips head screwdriver
Wrench (1/4”)
Hardware Kit - #7
Carefully read and understand all instructions before proceeding.
NOTICE
Adjust the rear limit switch so the power top shuts off
when it is cycled up and closed. Tighten fasteners once
adjusted.
2
Adjust the front limit switch so the power top shuts off
when the top is cycled down and open. Tighten
fasteners once adjusted.
3
1
Test the Power Top to confirm that it is working correctly.
Please refer to the operational checklist found on
page 3.
Hold down the brake then press the
left side of the
switch to open the top. Press the
right side of the
switch to close the top.
Please refer to page 1-2 for further information on safety.
WARNING
!
!
Entanglement & Pinch Hazards