Rugged Ridge PowerTop Kit, 07-14 Jeep Wrangler Unlimited (JK), Black User Manual
Page 34
Section G
Page 32
With the power top in the open position, attach the
provided Velcro® strip to the location indicated on the
header.
Fold the flap over the attached Velcro® strip as shown in
the image.
21
22
©2012
Partially open the power top to the point where the side
arm assemblies hinges begin to close.
Fasten the loose end of the cable into the hole indicated
on Bow B. Note: Three adjustment holes are located on
bow B. If the cable become too loose when the top is
closed, move the cable attachment to the next hole to
tighten the tension.
19
20
Fasten the canvas cable to the header.
14
18
Measure and mark the side of the header as indicated.
Drill a 3/16” hole into the side of the header.
Cutting Hazard: Avoid excessive pressure &
heat on bit. Use gloves and eye protection.
Do not damage canvas or vehicle.
17
#10x.5 Button
Head Bolt
1/4x.5 Button
Head Bolt
1/4 Nut
#10 Flange
Nut
¼
”
¼
”
CAUTION
!