Outdoor unit installation, Fig. 4 fig. 5 – Comfort-Aire CMA36SB-1 User Manual
Page 7
Advertising
7
Heat Controller
Horizontal/Side Discharge Condensing Units
OUTDOOR UNIT INSTALLATION
continued
Clearances
1. Ensure that there is sufficient clearance
around the unit for installation and maintenance.
Clearance must be maintained to ensure that the
air inlets and outlets are not obstructed.
[See Fig. 4].
Anchor the outdoor unit with a 10mm (3/8 inch)
diameter bolt and nut tightly on a concrete or
rigid surface
[See Fig. 5]. Anchoring is especially
recommended in seaside/high wind applications
and/or areas prone to earthquakes.
LQFK
LQFK
LQFK
LQFKHV
Fig. 4
Fig. 5
1. Split type outdoor unit clearances
1. Split type outdoor unit dimensions
Units in inches
Advertising