BrandTech Scientific Transferpette S -8/-12 - Manual (Page 42)

B
C
A
III
I
II
Z
42
Servicing and Cleaning
The three main components of the manifold can be easily separated and
disassembled for servicing, cleaning or replacing parts. The procedures
are illustrated on the following pages.
The changing of the V-rings/O-rings on the individual nose
cones is described in detail in the instructions enclosed with
the spare part.
Note:
A
Piston unit with piston support bar
[ I ] and pistons inserted in this unit,
which can be unscrewed individually
for cleaning or replacement.
B
Nose cone assembly with nose
cone support bar [ II ] and central
guide rod (Z), which is attached to
this, and the nose cones and seals,
which can be unscrewed individually
for cleaning or replacement.
C
Manifold housing, which is con-
nected to the manifold housing cover
[ III ] of the piston unit with two turn-
lock fasteners.
The main components of the manifold